On the first day of December it feels a little rude to not present you with a Christmas post. I’m a huge fan of the festive season, so you’re lucky I held back as long as I did.

Last year I was meandering around a craft fair and spotted a lino print stall. Now I tried lino printing at secondary school, and it made me a bit cross. I am a big fan of precision and this craft definitely comes with a dollop of ‘rustic handmade’.

This was my first bash at lino cutting and printing since the age of 14 I figure the extra years of ‘get over yourself’ and the added dexterity contributed significantly to making this a very satisfying little project.

You do need a little more ‘specialist’ equipment this time than usual, but you can set yourself up relatively cheaply with the kit. I used a combo of Amazon and Handprinted.

You will need

Ink tray

Ink brayer

Ink

Lino cutter (preferably with a choice of blades)

Greeting card blanks

Soft cut lino sheets (the size of your card blanks)

Tracing paper or greaseproof

Step one

Draw around the outside of your sheet of lino so you don’t make your design too big.

Sketch out a word/picture. For your first cut I would avoid anything too intricate or with lots of corners. I went with letters in the end so I could cover up mistakes if I went wrong… I figured a lopsided squinty eyed penguin might just look a bit sad.

Step two

This is not essential but I outlined the design to make it easier to trace. This also helps neaten out/correct any mistakes.

Step three

Tape a piece of tracing paper or greaseproof to your design and draw over quite firmly in pencil.

Step four

Place the traced image upside-down on your lino tile, so that the pencil marks you just made are touching the surface, not facing out.

Scribble over the top to transfer the image to the tile. Be careful to use pressure without being too forceful otherwise you might make an indent on the lino that you don’t want.

NB: As an alternative to steps 1-4 you might prefer to draw straight onto the tile. However, again, be careful not to press too hard with the pencil and remember that your design will be reversed when printed, so any lettering needs to be back to front.

Step five

Place the lino in the middle of a chopping board. Nobody needs to go gouging any holes in their dining room table under my instruction thank you very much.

Using one of the wide cutters (labelled #10 in my pack) remove as much background space as you can. I started by making a gutter around my letters to avoid accidentally slipping into them.

My lino cutting skills leave a lot to be desired, but I’ll get better and so will you. Try not to worry too much if you accidentally cut something you’re not meant to.

Step six

Using a blade with a deeper and narrower u shape (I think this was #9) refine the edges around your design, ensuring there’s a fair bit of depth around them.

Step seven

Using an even finer, deeper v shaped blade (#2 was my choice) cut out any details. Doing things in this order enables you to practice a bit before working on the finer aspects of your design.

Step eight

Ink up your tray using a small splodge of ink and your brayer. You need less than you’d think so don’t over do it.

Roll the brayer back and forth until the ink looks like a smooth velvet. You’ll know it when you get there.

Step nine

Ink up your stamp by rolling the brayer back and forth. This took a bit more encouragement first time when the block was dry.

You can use the cutting tool to go back into the design where there’s ink and there’s not meant to be. I did that, and also lazily chopped a few corners off with scissors. Alternatively you can wipe excess ink with kitchen towel or even leave it there for that handmade look (which is pretty much unavoidable anyway).

Step ten

Firmly press your stamp onto the surface of a blank greetings card or your chosen back drop. I paid particular attention to pushing down the areas I knew there was design. You can always peel it back to take a peek or put a book on top and push on that to ensure an even press.

You could do some prints and frame them as gifts if you don’t fancy cards.

Step eleven

Ink back up and print away to your heart’s content.

Welcome to December everyone!