Tag: biscuit

Gingerbread architecture: The final frontier

At last, time to decorate.

This is by far the best bit, and your opportunity to hide any blemishes. For me, that was a whacking great crack down the front, the odd broken window pane and some darker than attractive edges. So fill your piping bags, stick on a Christmas film, or phone a good friend using hands-free and enjoy!

There are no steps in this post, just some ideas to get you going.

Things you need:

Royal icing of course (you can use regular but I find royal dries quicker and looks whiter)

Piping bags

Sweets Sweets Sweets

A little tip

When you’re buying your sweets you should have a think about roughly what will go where, specifically in terms of the roof. Make sure you overestimate how much you think you will need, it’s always surprising how quickly everything disappears. Particularly if you adopt a ‘one for the house, one for me’ approach, which is the correct way to do this in case you were wondering.

GingerbreadHouse13

I chose button tiles for my roof. The key is to make sure there is some overhang on your first layer, and then just keep going in lines, overlapping slightly, until you hit the top. Chocolate fingers or matchmakers work for a sort of log cabin look, or I’ve seen shredded wheat for a thatched roof (not sure who would want to eat that though!).

Once I had finished I dusted my roof with some icing sugar snow for a wintery look.

GingerbreadHouse11

The last couple of years I’ve done normal houses, but I’ve decided to start theming them more now I’ve got the hang of it a little bit. So this year’s effort is designed to be an old fashioned sweet shop (it seemed apt given the sugar coma it put me in). Obviously it needed an awning or two! I just coloured some of my icing red and alternated between the two colours until I reached the end. If you want straight lines then the trick is to hover away from the biscuit a bit so you have more control over the direction.

GingerbreadHouse12

What cosy winter hideaway is complete without some snow caught in the window panes? The idea here is to fill one of the corners a little more than the other, which I realised after piping the window in the centre…

And now ladies and gents…the finished article! Complete with flickering fire light (an LED tea light candle pushed through the doorway)

As you can see I bought mainly different coloured and sized circles: chocolate drops, silver balls, smarties and chocolate buttons. I like little dots of icing to decorate with too, but you need to decide what works best for you, it should be fun! I don’t really pre-plan, but buying lots of similar shaped things helps I think.

GingerbreadHouse21

GingerbreadHouse22

GingerbreadHouse24

GingerbreadHouse23

Oh wait!

That’s not all… remember this little guy?

GingerbreadHouse19

Well I decorated him too. The base he was sitting on is actually the lid of a gift box, I won’t show you what’s inside though, incase the recipient is reading this (there needs to be some element of surprise!) This adds a lovely personal touch to any present, or can just be the present in itself!

The front and back are A6 size (A4 paper folded into quarters) and then measure everything else out based on that. You can get at least four of these guys out of one batch of mixture.

Before you go…just one more little idea…

GingerbreadHouse20

A homemade festive gift without the fuss for someone you like, but not an ‘I made you a gingerbread house’ level of like.

To make a tree the easiest thing to do is to get your hands on star shaped biscuit cutters of at least three or four different sizes. You want around 16 or so stars for each tree, then just stack them with icing to stick each layer together. If you don’t have cutters then make some templates to cut round instead (you can do this using auto shapes on the computer). One batch of mixture should make at least 8 I reckon.

Pipe lots of blobs of icing and add silver balls, chocolate drops and smarties for decoration.

I used a candle holder turned upside down for the base, but a disc of cardboard covered in tinfoil would work just fine too. Remember, whatever you use, you aren’t going to get back!

The cellophane I used to wrap it was bought from a florist supplies shop online and was about £3 for the roll, which I’ve been using for various projects for about 2 years!

Cut a big square (bigger than you think), I made one as large as my roll would allow. Place tree on the middle and bring all the corners to meet in the middle. scrunch the remaining edges together and call for help (this will save your little finger aerobics when you’re tying the ribbon). With someone else holding it all together, double knot a few pieces of gift ribbon and curl the ends with scissors. Chop off the messy bits of plastic.

Voila!

Gingerbread architecture: Phase 2

Assemble!

So, I have a confession to make, I didn’t actually photograph the assemblage of the big house. All my fingers and toes were required to hold it together until the icing dried, so there was nothing left besides my nose to press the camera trigger.

Instead I whipped up another half batch of dough and made a little one to show you how to, aren’t I lovely?

Things you need:

Royal icing

Piping bag/Strong sandwich bag (snip a corner off to pipe)

Base

Tinfoil

An extra pair of hands

Deep breaths

GingerbreadHouse14

Step one:

Cover base in tinfoil/something pretty. Tin foil works well because it doesn’t soak up the icing. I used an upturned tray for the bigger one, and stuck ribbon where the tinfoil didn’t quite meet the edges. Chopping boards and baking trays also make a good base (but make sure you don’t need them for Christmas dinner first!) Alternatively you can buy one, but that would just eat into your sweets fund. Nobody wants that.

Step two:

Mix up your royal icing  and put in icing bag. It has to be pretty thick, or construction will be hard going. At the same time, make sure you can pipe it without getting hand cramp.

Step three:

Place back wall on a flat surface (if you use your base you have less far to travel when you flip it). Pipe along the two sides, as shown above.

GingerbreadHouse15

Step four:

Attach sides and hold for a while until the icing starts to dry, you might want to get another pair of hands involved here, or the salt and pepper shakers to everything in place. Pipe along the top edges.

GingerbreadHouse16

Step five:

Place the front on top. Definitely don’t drop it on your way over and crack it. That would be really silly.

GingerbreadHouse17

Step six:

Flip it! This is where with anything bigger, you will need someone else to help.

Now you can see the crack *sob*. So this also happened to my big house, I might show you in the next post, but I’m still deeply saddened by that (the sugar windows stuck to the tray rather than me dropping it but still, a perfectionist’s nightmare). I’m basically a massive klutz. All is not lost though.

At this stage you are unlikely to want to make any more gingerbread. So if this happens you need to make do and mend. This can be done with royal icing, but you’ll get a white line along the cracked bit. A better (albeit more perilous) way to fix the cracks is by making a sugar syrup. Essentially all you need to do is melt down some sugar in a frying pan and voila, you have baking’s version of super glue. Dip the broken pieces into the sugar and stick. Be careful though, definitely not a game for children to play. Sugar syrup is dangerously hot. If you end up dipping your thumb in it, don’t let your gut reaction be to stick it in your mouth to cool it off. That is a most unpleasant experience. 

Some people use sugar syrup to put their whole house together, but quite frankly, I value my life more than that, I’m far too clumsy.

GingerbreadHouse18

Step seven:

Now you have it upright and relatively stable, ice it all over. This looks a bit messier on a little house than a big one, but basically go around all the edges inside and out with icing. You can really go to town on the inside corners as nobody will see them, the more you can reinforce at this stage the better.

Step eight:

Stick the roof on and leave as long as you can to dry before decorating.

Step nine:

Stay tuned for phase three later this week.

Happy festive baking!