Category: Sewing

November 23, 2015

Santa Claus is coming to town

Two years of fabrefaction.co.uk friends. Yup. THAT HAPPENED. Thank you for the support and the loving, please keep sharing, commenting and messaging me; I love hearing from you and seeing what you’ve made.

In keeping with my first post ever, and the one year anniversary post of this little blog, here’s another lovely advent calendar for you to make.

“Oh but advent starts next week, I don’t have time!” Yes, yes you do. I made this in a day. Less than really when you consider I went out for breakfast and dinner. You could even take the easy way out and glue instead of sew.

This particular calendar is a labour of love for my very hardworking and wonderful sister. Poor duck got jealous of mine once, and this year I thought it was about time she had something a little more permanent so she never forgets again. Thanks for your love and support sib.

You will need

A dowel rod (40cm) (or a wire coat hanger)

Festive looking string or ribbon

Felt (I bought two packs of 5 felt squares from John Lewis, you’d probably need 6 or so A4 sheets)

24-48 chocolates (I used mini Lindor truffles (there are 22 in a bag) and some woodland friends from Waitrose)

Something a bit more special for Christmas eve

24 miniature pegs (I got these from Tiger)

Buttons etc to decorate

FIMO or air dry clay

A marker pen or ink and mini number stamps

This template for the stockings

Step one

Depending on the length of your dowel you might need to cut it down. Mark the cut point at 40cm.

Step two

Cut the end of the dowel off. Those of you into wood work (of which I am sure there are plenty) don’t judge me for my saw, I’m relatively confident after using it that it wasn’t the right choice.

Step three

measure a length of twine/string/ribbon about twice the length of the wood and double knot tie it onto either end. You might want to add a little glue to secure it. Make sure to turn it so the knot is at the back.

Step four

Hold the centre point of the twine and allow the rod to hang off the side of the table. Make sure it’s level and tie a knot in the middle so that you have a loop to use for hanging.

Step five

Using the template cut out 23 mini stockings (2 pieces of felt for each). I cut through two layers at a time, and squeezed 8 cut outs from each square of felt. If you bought A4 sheets I imagine you’ll get 10-12.

Step six

Keep cutting.

Step seven

Sew the stockings together using an overlocking or zig zag stitch. I edged the white bits separately before attaching them and left the heel hanging over the edge.

If you are making this for next Christmas, feel free to hand sew. I cover how to blanket stitch here. If you want this ready in time for this advent I recommend borrowing a sewing machine or using glue.

Step eight

Cut the excess off the heel of the stocking and any loose threads.

Step eight and a half

(Totally missed this step on the original post)

Secure the heel with a little dab of glue, but make sure it doesn’t soak through and stick the stocking together.

Step nine

I decided not to sew heels on all of them as I wanted a bit of variation. So I used some of the embellishments from last year’s advent calendar to decorate. Glue is acceptable here I reckon, otherwise you really need to sew them on before sewing them together.

Repeat until you have 23 little stockings and one big one.

Step ten

Fill your little stockings as you go, they look very cute as they stack up.

Step eleven

After a few learning lessons from last week, I made the number markers with air dry clay. I found it easier to work with than FIMO. It also worked really well to ink the stamps before pressing them into the shapes.

This is entirely optional, you could write the numbers on the pegs, stamp them, make circles of card instead etc etc.

Step twelve

Once the shapes have dried out (no cooking required with this clay), stick them to the pegs with enough space at the top to open and shut the peg without squashing them.

Step thirteen

Cut 6 lengths of ribbon. I decided to taper mine at different lengths, as you can see in the final photos. To shape the ends nicely, fold the ribbon in half and cut diagonally on the fold to create a v-shaped cut.

Step fourteen

Tie the ribbons onto the rod and peg the stockings on.

Happy Christmas FiFi xx

October 12, 2015

If you go down to the woods today…

This weekend saw the baby shower of a rather lovely lady by the name of Anna. You may (but probably won’t) remember us celebrating Anna’s hen party a while back, well now she’s about to pop a sprog would you believe?

Anna is a rather large fan of gnomes. Yeah, that was my reaction too, but you learn to embrace it after a while…she’s very endearing that way. Well, our friend Taylor (party planner extraordinaire and all round kindred spirit when it comes to carrying things out to obsessive levels of detail) decided to throw Anna a woodland themed shower. I know right? Cute. I totally took my camera and promptly forgot to take photos of all the lovely things; gingerbread fawns, woodland creature bunting, sausage roll snails and toadstool cupcakes to name just a few.

Anyway, other than baking some little flowerpot grassy gnome type cupcakes, I decided my contribution would be to carry the theme into my present and make a small selection of woodland characters to entertain baby upon her arrival into the world.

So here’s how to make your very own arsenal of woodland animal finger puppets, with a downloadable template of course.

You will need

Felt (for the patterns I have provided you need brown, beige, white, black, grey and orange)

Thread in corresponding colours

A needle

This free downloadable template

Step one

This is entirely optional. If you want to draw your own characters (or expand on the set I’ve provided) You will need to draw out a few designs. I used a deodorant can lid and a ruler to keep basic shape of my characters consistent.

If you want to cheat you could just trace the shape off the printable and add your own features to it.

Step two

Cut out all the shapes in the relevant coloured felt.

Step three

Sew on the faces, I just used simple stitches overlapping them for the noses and just a little line of backstitch for the mouths. No fancy embroidery techniques here.

Step four

Edge all the remaining features/bits of fur with blanket stitch (see below). You will notice that for the fox I sewed the tummy fur straight onto the puppet but left the cheeks separate to glue on later. With the badger I sewed his cheeks straight on because they followed the shape of his face and I just found it less logistically challenging somehow.

Step five

Blanket stitch the back and front of the puppet together. Utilising the memory bank of primary school sewing club for me, thanks Mrs Gothard, nailed it.

You basically need to put the needle through the felt at the height you want your stitching, and as you pull the thread through catch the loop so that it is held at the top. I’m sure the youtube can furnish you with a useful tutorial if my description and photos fail to do the job.

You need to include the ears as you go round, I just came back through at the top of the first stitch so my loop was on top of the felt to keep the effect going. I know, I wouldn’t understand that explanation either.

Step six

By this point if you’ve managed to follow any of my hapless instructions you will have yourself a blind little fox. On second thoughts, maybe we should have just started with the hedgehog.

Step seven

It’s ok to cheat. Just glue his eyes and fluff on, pop him over a fork or something just to make sure the glue doesn’t soak through and seal him shut.

Step eight

Make your fox some furry little friends.

November 24, 2014

Count up count down

There’s lots of things happening right now. The first one to mention is that fabrefaction TURNS 1 TODAY! I know, crazy right? I will leave any sentimental ramblings to my new year post, but it seems mad to me that my first little blog about an advent calendar made from egg boxes was only a year ago.

The other major thing that’s happening is that MEGAN IS GETTING MARRIED. In 12 days no less. Gawsh.

In honour of this we had a hen party last weekend in beautiful Bath. For part of the afternoon we had time to kill and every activity we looked up was crazy expensive or not available etc etc. After some deliberation it was suggested that I conjure up something to do.

So in honour of Meg’s wedding, fabrefaction’s birthday, and being as close as we are to December, it seemed like the perfect opportunity to use our make shift craft workshop to make an heirloom for Meg and Olly to obligingly hang at Christmas…at least as long as we’re friends…which will be forever, so…

DISCLAIMER: This post isn’t so much the usual step-by-step, more a little inspiration and a few tips along the way.

You will need

These little drawstring bags (or some like them)

24 little pegs (I got mine from Tiger, they’ve got numbered ones at the moment too)

3m ribbon to hang the pegs off

A whole plethora of Christmas themed haberdashery (The Range and Hobbycraft furnished us nicely)

A team of Santa’s little helpers

Now it depends how crazy you are, I rate as ‘very’ on the scale when it comes to craft. Cool kid I know.

Well, I didn’t quite fancy the thought of the hens free styling the numbers because I think a little bit of consistency helps the overall look of this kind of thing. Yes, I did tell them that as an introduction, and yes, I do have problems.

I printed the numbers in a chubby font to begin with using them as a template on felt.

If you don’t trust yourself to hold and cut at the same time turn the numbers upside down and draw round them very lightly. Then you won’t have pen marks when you turn them over. I was a bit heavy handed with the pen at first, so be warned.

I love a little blanket stitch on Christmassy craft. You basically need to put the needle through the felt at the height you want your stitching, and as you pull the thread through catch the loop so that it is held at the top.

Voila. Not fiddly at all. Nope.

If you are cutting regular fabric use pinking shears (the zig zag ones) so it doesn’t fray. Otherwise you may have to hem it all. The alternative if you don’t own pinking shears and don’t want to sew is to use felt, or just chance it with the fraying (but then we can’t be friends).

How cute are those little gingerbread buttons?! It helped to hold them down where I wanted them and half turn the bag inside out to sew.

I found it best to sew any details onto the individual items and then glue them down using a few dabs of PVA. You can be a lot more precise that way.

One down. Twenty three to go. Time to rope in some helpers…

Everyone got involved with the gluing action so don’t be ashamed. I loved little Rudolph with his number 11 antlers.

A few more.

The whole shebang! I love the way this turned out, and now Meg has a keepsake from some of her favourite people.

Thank you for visiting my little space of internets. It’s kept me going all year, here’s to another.

Katie.

November 10, 2014

Half term hair bands

This half term holiday I had promised two little friends of mine a day in my London pad. They were very excited and had all kinds of crafty plans and ideas to keep us busy.

When thinking about what we could do on a budget, I remembered learning how to sew when not much older than them.

I was pretty impressed with these two; by the end they were using the sewing machine unaided (although for their parents’ benefit – heavily supervised!)

This is a great little project for beginners of any age, but for the reference of anyone planning to do this with children, these two are 7 and 8 and handled it very well. It would certainly be doable if you don’t have a machine too.

You will need

Cute fabric

Elasticated hair bands

Needle and thread (or a sewing machine)

Step one

Cut two lengths of fabric, one 7cm x 22cm and the other 3.5 cm x 12 cm.

Step two

Sew a small hem along the long edges as shown above.

When doing this with the girls they used the foot while I guided it through at first, then I took a turn with the foot so they could guide, then they took the helm altogether.

Step three

Join the larger piece with right sides facing. Turn it through so the right sides are showing.

Step four

Lie the smaller strip down, right side facing upwards. Place the larger piece on top with the seam running down the centre.

Pop the hairband on top.

Step five

Loop the smaller strip of fabric through the hair band and squeeze it all together. Don’t worry too much about the shape of the bow for now, plenty of time to sort that out later.

Step six

Sew across the smaller piece of fabric as close to main body of the bow as your machine will allow. That being said, if you are hand sewing (and therefore have a bit more control) do leave a little wiggle room.

Step seven

Chop off the excess fabric.

Step eight

Turn the loop the right way round and attach it to some hair.

March 3, 2014

Just ten more minutes…

Don’t get me wrong, I’m loving that Spring is having a little flirt with us at the moment. The evenings are getting longer and the sun is playing peek-a-boo. At the same time, sometimes you wake up a little bit earlier than intended at the weekend or you just want to shut it all out for a little Sunday nap. So here’s a really quick and easy make for catching some Zzz or maybe adding to a little pamper package for Mother’s Day? More on that later…

You will need

Some pretty scrap fabric (the darker and thicker the better)

Bias binding (mine was 12mm thick)

17″/43cm Elastic

Needle and thread/Sewing machine

Pins

Downloadable template

Step one

Pin the template to at least two layers of fabric. At this stage you might also want to sandwich a little padding in between, but I didn’t have any to hand so just went without.

I just used some scrap fabric for this make, but I would advise you choose a darker palette than this if you can as it will block out more light.

Cut around the template, leaving a small seam allowance, a couple of mm will do as you aren’t turning inside out.

Step two

Remove template and re-pin your fabric layers together. You will see I used some of the adhesive fabric I used for my bookbinding tutorial. This was an error. The iron isn’t a huge fan of this material and vice versa. You will see later.

ANYWAY. Sew around the edge to bind all the layers together. Make sure that if you are using patterned fabric the right side is facing out.

Step three

So, I never knew how to sew on bias binding properly until a few months ago. It changes your life. Seriously.

You will notice that one of the folds in your bias binding is slightly smaller than the other side. You want to open the shorter side out and pin to the edge of your fabric as shown above.

Note that the pins are facing outwards, this is because I was using a sewing machine and this way it just runs straight over, no need to pull them out as you go. If you’re hand sewing you probably want to pin the opposite way so you still have hands left at the end.

Step four

Sew around the binding, on the outer edge of the fold (see above).

Unpin.

Step five

Turn the bias binding over and use an iron to press it down (mainly for the benefit of people using a sewing machine)

Pin the elastic under the bias on both sides. You want to adjust this to size depending on who you’re making it for, 17″/43cm was a little on the large side for me so perhaps go a bit smaller or measure round the back of your head from temple to temple. Don’t forget to take a bit of length off so it holds by the stretch.

Step six

Sew the top of the bias binding as close to the edge as you can. Use a close zigzag stitch to secure elastic to the front of the mask, this will stop any light seeping through the gaps at the sides.

(you can see that the heat of the iron on the adhesive wrinkled my top fabric layer quite a lot, this shouldn’t happen to you!)

Step seven

3, 2, 1, nap.

Have a great week folks!