Tag: Decoration

November 16, 2015

Stick it, hang it, tag it

A classic case of things not turning out quite how they were meant to this week. I’m not sure exactly what I was expecting, but my housemates managed to cajole me into embracing the rustic charm of these makes nonetheless. By the end I managed to accept them as ‘not too bad after all’ and the lack of precision means that they would be a great little craft for kiddies as the winter creeps in.

With Christmas decorating just around the corner these guys are a great finishing touch as tree decorations, tags on presents and for card making. They are cheap to make and are cute little token gifts for the people you love, or at least those you like enough to want to give them something, but not enough to actually apply yourself to Christmas shopping.

You will need

A block of FIMO modelling clay

Shape cutters

Festive string or ribbon

Acrylic paint and a small paint brush

Alphabet cookie stamp, I go this from Tiger recently (or regular stamps might work)

A paperclip

Step one

Roll the FIMO out into a thin sheet, about 2-3mm thick.

I learned a few things here. Greaseproof paper is not the easiest thing to roll this out onto, a clean surface would be better. Roll the FIMO into a ball with your hands first to warm it up a bit as it will be easier than just rolling straight onto the block. Dust will get into the FIMO so easily, it picks up EVERYTHING, so make sure you wipe your rolling pin and surface carefully.

Step two

Cut out a variety of shapes. Re-roll and keep cutting until you have used all the FIMO. It’s surprising how many you get in the end out of such a small block.

Step three

Stamp the names of your nearest and dearest into the shapes. I found that words longer than four letters were problematic. I employed some creative shortenings, although my housie Marianne was not impressed with Matz as her new nickname. It will depend on the sizes of your cutters, but you might want to do initials or words like ‘love’, ‘joy’ and ‘noel’ if there’re some long names knocking about.

Step four

Using a cocktail stick or bent out paperclip make a hole at the top for the hanging. Wiggle the stick about in a circular motion to make sure the opening is big enough for your string or ribbon.

I then made dots all around as an edging with a paperclip.

Step five

Place on greaseproof paper and onto a tray. Bake in the oven on 100C/200F/gas mark 1 for about 30 minutes. I guessed because the packet provides zero instructions, other than to not heat it above 130C. You can tell by picking them up as they start to feel less soft and a bit lighter as they cook.

Step six

Using very watery acrylic paint, brush over the letters and the edging. Quickly dab away the excess with some clingfilm to create a rustic look.

Use one: Tie up with a couple of trimmings from the garden, maybe a button/pom pom/little bell like mine. Tie with the string around a gift wrapped in brown paper.

Use two: String up and hang from a jug of twigs or your Chrimbo tree.

Use three: Make mini ones with initials and create a simple Christmas card with a piece of wash tape and brown card.

January 19, 2015

Banner-tastic

I’m finally going to wrap up my little series of posts from Matt and Vicky’s engagement party this week. I know, you didn’t think there could possibly be more right? Well, no party is complete without a banner.

Just in case their guests forgot, I made a little congratulations banner. A congrats banner, let’s be honest, congratulations is a long word.

You will need

Some pretty paper or card

A craft knife and a cutting mat (or chopping board)

Double-sided tape

String

Step one

Using a chunky font, type out the message for your banner. I think this was Futura in case you want to copy exactly (but then you would also need to find a Matt and a Vicky to congratulate).

Step two

Cut out little flag shapes big enough to house your letters, remember to leave at least half a centimetre at the top to fold over.

These are super simple to get even, just draw a rectangle with a line down the centre and then draw two diagonals from the corner to the same point on the central line. Use the first one as a template.

Step three

Glue the front of the letters and stick them face down on the back of each flag.

Use a craft knife to cut around the edge of the letter. The child in me was bizarrely satisfied by punching these out.

When cutting out letters like A and O which have a counter in them remember to keep a small stem so you don’t totally hollow them out.

Step four

Using open scissors score the top of the flag (on the back) to create a fold.

Step five

Stick double sided tape inside the fold, making sure it’s right to the top edge. Place the string in the fold and stick down.

Step six

Repeat until you have a full sentiment.

Ta da!

December 22, 2014

The final sprint

Some years (every year) I have grand plans for home made gifts and decorations at Christmas. Rarely does this materialise in the lovely relaxed and whimsical way it looks in my head. Generally I end up covered in the contents of my baking cupboard feeling totally harassed by the number of hampers I’ve decided to make.

If you’re anything like me, or if you’re completely handmade/craft-phobic in the first place, this one is for you. Three super quick festive crafts to brighten up the house and fill up stockings at the last minute. You don’t need an ounce of artistic/baking ability for any of these. So no excuses.

#1: Cute Christmas bunting

You will need

String (I got this two colour spool from Tiger for £1)

Christmassy washi-tape

Step one

Cut a random length of tape and place the string in the middle. If you really want to punish yourself you can try and make them all the same length, but I really like them random and it’s much easier that way too.

For this step I cut loads and stuck them on the edge of the table so I had them ready and did them in batches so I wasn’t constantly cutting one then sticking it etc etc.

Step two

Fold over the wash tape and stick together. Again, I found it easier to do this step in bulk and then snip them in one go (see below).

Step three

Cut an upside-down ‘v’ shape into the end.

Step four

Hang them. 

#2: Twig decoration

You will need

Some twigs foraged from the nearest tree

White or cream spray paint

Fairy lights or decorations

Jug/vase/plant pot

Step one

Spray twigs.

Step two

Place in holder.

Step three

Decorate.

Just in case you want the tutorial, here’s how to make the candle holders in the photo.

#3: Hot chocolate stirrers

I saw one of these at the shops today, it was £3! These make a great little stocking filler, present topper-upper or gifts for the neighbours. Just swirl into hot milk for a luxury hot chocolate.

You will need

400g/ 14oz Milk chocolate

50g/ 1.5oz White chocolate

Condiment cups (if the closest McDonalds doesn’t have these you can buy them online, or use mini-muffin cases)

Mini mini marshmallows (these tiny fellows are from Waitrose)

Fudge pieces

Cake pop sticks

Edible glitter (optional)

(Makes 10-12. You need roughly 35g chocolate per cup so adjust the above to suit the number of hot chocolates you want to make).

For wrapping

Cellophane roll (available online or from craft shops)

Chrismassy ribbon or string

Step one

Chop the fudge into little chunks so that they’re roughly in proportion with the marshmallows.

Step two

Melt the chocolate slowly in the microwave and put into piping bags. You can temper it if you want, but given that you won’t see much of it, it might not be worthwhile. I go into a bit more detail as to how to temper chocolate here.

Step three

Fill cup to near the brim with milk chocolate. Add a little white and swirl in with a cocktail stick.

Place stick in and surround with fudge and marshmallows.

Leave to set.

Step four

Dust on a little glitter.

Step five

Wrap up. Cut a square of cellophane wrap and place cup in the centre, bring corners up to the middle and secure. I used a loom band to do this, you could use a small elastic band or go straight in with the ribbon/string.

Trim off the corners and ‘foof’.

Go on. There must be one spare you can treat yourself to?

October 20, 2014

Burning the midnight oil

Winter is fast approaching and it’s time to get cosy. Cosy equals candles. At least it does this week, because I had left over spray paint from my mat making, and I really like spray painting things. Like really like it. In an unhealthy way.

This is a pretty easy quick make, and is satisfyingly effective. I recommend it for adding a bit of pizazz at a dinner party or even for sticking a couple of flower stems in rather than candles.

You will need

Clear glass bottles

White or cream dinner candles

Spray paint of your desired colour(s)

Newspaper and masking/washi tape

Step one

If your bottles have labels like mine did then you need to pour boiling water over them to soak alla that off.

They drink a lot of posh juice at work so I got these bad boys for free. You could also buy some from the home brew section of a Lakeland/Wilko’s; if that’s you, advance to step three and collect £200 as you pass Go.

Step two

If you’re using recycled juice/wine bottles then stick a little screwdriver or a knife in the metal bit and prise it off. It’s worth not being lazy and skipping this step.

Step three

Wrap the tops or bottoms of your bottles in newspaper, securing it with wash tape or masking tape which would be a lot cheaper if you have it to hand. As you can see, I didn’t.

The more care you take over this the better as you want the lines to be as straight as possible. Otherwise your OCD friends won’t enjoy your company at your dinner party; they will be too distracted by your wonky candle holders. They will be totally justified in this.

Step four

Go outside and put down some newspaper. Obviously the best time to do this is on a dry day, but let’s just see how well the British weather co-operates with you…

Shake the can of spray paint and hold about 20cm/8 inches away. Spray thoroughly until the bottle has an even, opaque colour.

Leave to dry.

Step four – bonus tip

If you’ve wrapped the top of the bottle rather than the bottom, I found the easiest way was to hold the neck in my hand and spray while holding it.

In order to dry it you need to find something to wedge between so it’s sides/the bottom won’t touch anything else. You could just hold it as they don’t take long to dry at all, but I found this storage chest/bench in the garden was just the ticket.

Step five

Whilst your bottles are drying you might need to do a little candle whittling. Mine had really handy grooves in them already but unfortunately were still a little on the large side, so I had to trim them down.

Just for the sake of everyone who knows how clumsy I am and would reel in horror at this picture, I still have all ten digits.

Step six

Push candles into the bottle necks and admire.

December 28, 2013

Let’s party like it’s 2014

I don’t know about you but I’m always taken by surprise when New Year rolls around, I’m so distracted by Christmas it’s a bit ‘oh! there you are’ on NYE.

If your experience is anything like mine you’ll need a make which is easy on the budget and low hassle. I present to you cut out party hats.

You will need:

A4 coloured card/paper (one sheet per hat)

Glue/Double sided tape

Scissors

Elastic/String/Wool

Step one

Cut a corner off your sheet, at a 45 degree angle. Don’t worry if you don’t have a protractor – just fold a scrap piece of paper to a point on one of the corners and use as a guide.

Step two

Make the first fold by matching your cut edge to the top edge of the paper. Essentially making a point from that wide angle you just created.

Step three

Fold at least twice more. My paper was quite thick so this is as far as mine would go without forcing it, but feel free to keep folding.

Step four

Find the shortest edge going across your hat, and cut the excess off at this point.

Step five

Unfold to check your curve is ok, if not neaten any points with scissors.

Step six

Fold back up and make your cuts. This is generally easier with paper but then if you over cut you weaken your hat so keep a good balance!

Make sure you keep a line at the bottom in tact so you can add your string and wear your hat.

Step seven:

Unfold and survey your masterpiece.

Iron this flat or leave under a heavy box/book for a few hours. The thinner your paper/card the more of your creases you will get out, but don’t worry too much, you won’t really notice on the finished item.

Step eight

Retrieve that discarded corner from earlier, and cut a strip from the longest edge.

Cover in glue or double sided tape and assemble your hat. I then cut a second strip and stuck inside to strengthen the hold.

Step nine

Bit of a Blue Peter moment here…place bit of blu tac/banana under your hat edge and use something sharp to make a hole. Repeat on opposite side.

Now, I had some elastic lying around. If you do too, measure it under your chin and round the sides of your head, but make sure to cut it slightly shorter than this distance so that there’s some pull to keep it in place. Push through the hole and tie a knot on the inside.

If you don’t have elastic do not despair; string or thin wool will work too, you can just do two long strips and tie in a bow under your chin.

Step ten

Put on head, have great time.